PRISMA
Established in 1994, Prisma Electrical Controls Corp. works closely with electrical engineers, designers and consultants for commercial, residential and industrial projects. Our team consists of dedicated and hardworking professionals who provide safe, reliable, energy-efficient, and cost-effective solutions
Where to Find Us
- 682 Florentino Torres St. Corner Soler St., Sta. Cruz, Manila
- Hot Line: +(632) 8734-1094 to 96
- mail@prismaelectrical.com
PRISMA
- mail@prismaelectrical.com
- 682 Florentino Torres St. Corner Soler St., Sta. Cruz, Manila
Established in 1994, Prisma Electrical Controls Corp. works closely with electrical engineers, designers and consultants for commercial, residential and industrial projects. Our team consists of dedicated and hardworking professionals who provide safe, reliable, energy-efficient, and cost-effective solutions
Where to Find Us
- 682 Florentino Torres St. Corner Soler St., Sta. Cruz, Manila
- Hot Line: +(632) 8734-1094 to 96
- mail@prismaelectrical.com
Products1
Showing 209–224 of 230 results
-
RCBO
DESCRIPTION
RCBOs combine, in a single device, the protection against leakage current to ground typical of RCCBs with the protection against over currents (overload and short-circuit) typical of MCBs.
- RCBOs are a compact solution for the protection of people and connected equipment.
- DS201 Series
- 16A- 40A, lP+N, 240VAC, 30mA
-
RCBO DS201
DESCRIPTION
DS201 RCBOs offer protection of end user single-phase circuits against overload and short-circuit currents protection against the effects of sinusoidal alternating and direct pulsating earth fault currents as well as protection against indirect contact and additional protection against direct contact.
Easy to install
Easier and faster wiring operations thanks to the two slots of different dimensions that allow connection both with cable and busbars.Continuous operation
Reduced downtime for maintenance operations thanks to the earth fault indicator. Fast and easy identification of the contacts’ status thanks to the CPI window.Expandability
Wide range of accessories with lots of different functions offeredTechnical Specs:
- AC, A, G, AP-R, F type available
- IEC/EN 61009
- 1P+N
- Breaking capacity of 4.5, 6, 10 kA
- Sensitivity from 10 to 300 mA
- B, C, D and K tripping characteristic
- Test pushbutton to verify the correct functioning of the device
- Earth fault indicator to identify easier earth faults
- Information on the device are laser printed to make them clearly visible and long lasting
- Contact position indicator (CPI): to always know the status of the contacts (red: closed contacts; green: open contacts) independently on the toggle position
-
S200
DESCRIPTION
A range designed to ensure efficiency and protection
The S200 range is designed to protect installations from overloads and short circuits, ensuring reliability and safety under all operating conditions. We feature a broad portfolio that offers solutions for many different applications, either for domestic, small commercial or industrial solutions. Due to approvals according to most major standards it can be used in installations worldwide. Furthermore the S200 range is fully compatible with a wide range of accessoriesTechnical Specs :
- 2A-100A
- 1P,2P,3P
- AC/DC Input Voltage
- IEC 60847-2, IEC 60898
Main Benefits :
- Versatile – wide range suitable for a variety of applications & segments.
- Global availability thanks to standards & approvals.
- Expandability through a wide range of accessories.
Main Features :
- Twin terminal for separate feeding of busbar and conductor.
- IP20 – finger safety.
- Easy identification of the product and highly resistant laser marking.
- Safe your time – all important data available right away.
- Quick identification thanks to laser printed EAN marking.
- Contact position indication.
- Captive screws – don’t lose what’s important for you.
- Whatever your application need is applicable with a wide range of accessories.
-
SACE Tmax XT
DESCRIPTION
The SACE Tmax XT series of Moulded Case Circuit Breakers (MCCBs) are designed to maximize ease of use, integration and connectivity while reliably delivering safety and quality. Rather than just offering standalone protection, they are seen as key elements of the system that give you complete flexibility, extreme breaking capabilities and reliable performance under pressure. With seven different sizes and protection features of up to 1600A there’s a solution for every purpose.
Tmax XT moulded case circuit breakers guarantee an extremely high performance level while being progressively smaller in size, simple to install and able to provide increasingly better safety. Range is complete with four frame sizes: XT1, XT2 up to 160A and XT3, XT4 up to 250A.
FEATURES
- High breaking capacity in compact dimensions
- XTraordinary limiting characteristics allow savings in copper and footprint in switchboard, high selectivity values and very compact motor protection solutions.
- Ease of use and installation flexibility
- A dedicated range of accessories and a renewed solution for electronic trip units to adapt Tmax XT to different applications scenarios.
- Customized protection and information availability
- Specific electronic trip units for energy metering, motor protection and generator protection in addition to a Modbus communication module for integration in a supervision system.
- Increased safety for operators
- Wide range of keylocks and padlocking options, plug in and withdrawable versions to speed up maintenance operations and improved diagnostic to have ready to use information about breakers’ status.
Benefits
Cloud connected
To keep a system under control it should be monitorable from everywhere.Plant management of the future – SACE Tmax XT sets standards in modern plant and energy management. Access, monitor and control information remotely, anywhere, at any time. Improving efficiency and saving energy.
Tailor made
Even if the task is complex the solution is simple.Maximum flexibility for every application – SACE Tmax XT sets standards for electrical installations. Easy selection, one-fits-all accessories and intuitive design pave the way for smart manufacturing of panels and fast upgrades. Even for the most critical projects.
Outstanding technology
Meeting high-performance requirements with zero efforts.Continuity of service and equipment protection – SACE Tmax XT sets standards when extreme breaking capacity is needed. Sharing the same logics, interfaces and features regardless of operating voltage and environmental conditions. Embedding the most advanced protection into the smallest of frames.
Top-level products
The reliability of a system relies on the interplay of details.Absolute attention to detail, with style – from design to manufacturing, SACE Tmax XT sets standards for edge technologies. Almost a century of research and experience means top-level products that are ready to face future challenges.
Technical Specs
- IEC 60947-2
- 16A to 1600A
- 3P,4P
- Fixed, withdrawable
- Upto to 200kA Icu @415V
-
Square Box : UL LISTED E476800
DESCRIPTION
CATALOG NO. MGSB-1/2-3/4 MGSB1116-1/2-3/4 MGERSB-1/2-3/4 MGERSB1116-1/2-3/4 SIZE 4”x4” x 2-1/8” 4-11/16” x 4-11/16”x2-1/8” 4”x4” x 2-1/8” 4-11/16” x 4-11/16”x2-1/2” SIDE K.O. (2) 1/2” or 3/4” Con. (2) 1/2” or 3/4” Concentric 8-1/2” & 4-3/4” 8-1/2” & 4-3/4” BOTTOM K.O. (2) 1/2” & (2) 3/4” (2) 1/2” & (2) 1/2” & 3/4” Con. N/A N/A THICKNESS Gauge 16 Gauge 16 Gauge 16 Gauge 16 -
Steel Flexible Conduit
Applications:
Indoor fittings
Underfloor applications (computers/floor boxes)
Machineries / motor controls
Areas subject to heat and sparks -
Thermal Overload Relays (TOR)
DESCRIPTION
Motor protection for overload and phase failure
Thermal overload relays are economic electromechanical protection devices for the main circuit. In combination with contactors, they provide reliable protection against overloads and phase failures for motors. They allow to set up customized motor starting solutions according to individual needs.
Main Benefits
- Reliable protection for motors in the event of overload or phase failure
- Easy creation of individual motor starting solutions
- Perfect fit to ABB’s contactors: directly mounted and connected without further wiring
- Single mounting kits and accessories for remote control available for specific applications
- Selectable automatic reset mode allows to reduce downtimes and travelling costs
- In combination with ABB mini contactors, the installation in narrow spaces is possible
- Rated for AC and DC loads
Main Features
- Trip class 10/10A
- Adjustable current setting ranges
- Overload protection with phase loss sensitivity
- Temperature compensation up to +70°C
- Selection between automatic or manual reset mode
- Stop and test function
- Finger safe housing (IP20)
- Large markings on setting scale for precise setting
- Suitable for 1-phase applications
