The DLATS is a range of pluggable dataline surge protector with remote fault signaling feature which allows the user to detect remotely a faulty surge protector. The product is made with a monitoring module which controls, through a wire bus, the status of the surge protective modules. In case of operation of an internal disconnection mechanism of the one or several surge protective modules, the monitoring module will send the information through the closing of a electrical contact. At the same time, the front LED of the defective surge protective modules, normally green color, will turn red. Thanks to the pluggable construction, the defective module will be easily replaced by a new one. One monitoring module, powered by 24 Vdc, could manage up to 24 surge protective modules. The surge protective modules are based of Gas tube and fast clamping diodes association for high discharge capability and low clamping level. The end of lile of the SPD will create a line disconnection (Fault Mode 3 following IEC61643-21).
Citel – DLATS-48D3
1-pair dataline/telecom surge protection
Din rail mounting
Plug-in module
Local and Remote signaling of SPD status (functional/failure)
1 control module (white) + SPD modules (yellow): 24 SPDs maximum by control module
Maximum dsicharge current Imax: 20kA
Compliance with IEC/EN 61643-21, UL 497A, GB 188002.21