Moulded Case Circuit Breaker (MCCB)
DESCRIPTION
The new SACE FORMULA family consists of three new A1, A2 and A3 frames which reach up to 125A, 250A and 630A respectively. The three frames are available in the fixed version, with front terminals. The protection trip unit has fixed thermal and magnetic threshold values for putting the circuit-breaker into service more rapidly. This way selection becomes simple and precise. With a few sales codes which simplify selection and make ordering easier. Installation is simplified, and thanks to easy and rapid fixing operations and set-up, the circuit-breaker is
ready for use immediately
Quality is great versatility. In addiction to proposing all three frames in the three-pole and four-pole version, for the first time ABB SACE now proposes single-pole and two-pole versions up
to 250A, opening the door to the most varied application fields. Quality is compact overall dimensions. The SACE FORMULA A1 and A2 depth of just 60 mm is the lowest on the market up
to 250A. Turn on screen reader support
Related products
-
RCBO DS201
DESCRIPTION
DS201 RCBOs offer protection of end user single-phase circuits against overload and short-circuit currents protection against the effects of sinusoidal alternating and direct pulsating earth fault currents as well as protection against indirect contact and additional protection against direct contact.
Easy to install
Easier and faster wiring operations thanks to the two slots of different dimensions that allow connection both with cable and busbars.Continuous operation
Reduced downtime for maintenance operations thanks to the earth fault indicator. Fast and easy identification of the contacts’ status thanks to the CPI window.Expandability
Wide range of accessories with lots of different functions offeredTechnical Specs:
- AC, A, G, AP-R, F type available
- IEC/EN 61009
- 1P+N
- Breaking capacity of 4.5, 6, 10 kA
- Sensitivity from 10 to 300 mA
- B, C, D and K tripping characteristic
- Test pushbutton to verify the correct functioning of the device
- Earth fault indicator to identify easier earth faults
- Information on the device are laser printed to make them clearly visible and long lasting
- Contact position indicator (CPI): to always know the status of the contacts (red: closed contacts; green: open contacts) independently on the toggle position
-
S200
DESCRIPTION
A range designed to ensure efficiency and protection
The S200 range is designed to protect installations from overloads and short circuits, ensuring reliability and safety under all operating conditions. We feature a broad portfolio that offers solutions for many different applications, either for domestic, small commercial or industrial solutions. Due to approvals according to most major standards it can be used in installations worldwide. Furthermore the S200 range is fully compatible with a wide range of accessoriesTechnical Specs :
- 2A-100A
- 1P,2P,3P
- AC/DC Input Voltage
- IEC 60847-2, IEC 60898
Main Benefits :
- Versatile – wide range suitable for a variety of applications & segments.
- Global availability thanks to standards & approvals.
- Expandability through a wide range of accessories.
Main Features :
- Twin terminal for separate feeding of busbar and conductor.
- IP20 – finger safety.
- Easy identification of the product and highly resistant laser marking.
- Safe your time – all important data available right away.
- Quick identification thanks to laser printed EAN marking.
- Contact position indication.
- Captive screws – don’t lose what’s important for you.
- Whatever your application need is applicable with a wide range of accessories.
-
ABB OPR
DESCRIPTION
During a storm, when propagation field conditions are favorable, an OPR ESE air terminal will generate an upward leader. This upward leader from the OPR tip propagates towards the downward leader from the cloud.
The emission of an early streamer to a lightning event delivers a beneficial triggering time compared to a single rod air terminal exposed to the same conditions. This in turn drives the enhanced performance and protective distance achievable by ESE devices.
The beneficial triggering time is determined as the average time gained at the moment of sparkover, with efficiency confirmed by high-voltage laboratory testing. All ESE tests are defined in Annex C of the French standard NF C 17-102 (2011 Version).This beneficial triggering makes OPR air terminals especially effective for the protection of industrial sites, administrative or public buildings, monuments and open-air sites such as sports grounds.
OPR: the high pulse voltage, early streamer lightning air terminal
In ongoing collaboration with the CNRS (French National Research Organization), ABB continues to innovate and has developed a new generation of lightning protection devices – the OPR early streamer emission (ESE system). This OPR range delivers improved performance in early streamer initiation and propagation, and represents further progress in terms of lightning protection, operating autonomy and ease of maintenance. These advancements reinforce ABB’s leading position in active lightning protection, with over 200000 installations worldwide.
-
Thermal Overload Relays (TOR)
DESCRIPTION
Motor protection for overload and phase failure
Thermal overload relays are economic electromechanical protection devices for the main circuit. In combination with contactors, they provide reliable protection against overloads and phase failures for motors. They allow to set up customized motor starting solutions according to individual needs.
Main Benefits
- Reliable protection for motors in the event of overload or phase failure
- Easy creation of individual motor starting solutions
- Perfect fit to ABB’s contactors: directly mounted and connected without further wiring
- Single mounting kits and accessories for remote control available for specific applications
- Selectable automatic reset mode allows to reduce downtimes and travelling costs
- In combination with ABB mini contactors, the installation in narrow spaces is possible
- Rated for AC and DC loads
Main Features
- Trip class 10/10A
- Adjustable current setting ranges
- Overload protection with phase loss sensitivity
- Temperature compensation up to +70°C
- Selection between automatic or manual reset mode
- Stop and test function
- Finger safe housing (IP20)
- Large markings on setting scale for precise setting
- Suitable for 1-phase applications
Reviews
There are no reviews yet.